...
Some MikroTik PoE-Out devices support the global PoE setting which can be configured under /interface ethernet poe settings menu. Global setting ether1-poe-in-long-cable feature disables strict input/output current monitoring (short detection) to allow the use of PoE-Out with long ethernet cables and/or avoiding improper short-circuit detection.
| Property | Description |
|---|---|
| ether1-poe-in-long-cable (yes | no) | Setting it to "yes" will disable short detection on all poe-out ports. This is potentially dangerous settings and should be used with caution |
...
Global setting
...
ether1-poe-in-long-cable feature disables strict input/output current monitoring (short detection) to allow the use of PoE-Out with long ethernet cables and/or avoiding improper short-circuit detection.
| Info |
|---|
Note: Global setting of ether1-poe-in-long-cable can also affect PoE-Out can also affect PoE-Out behavior on PSE which is powered using a DC connector |
| Property | Description |
|---|---|
psuX-max-power | Specifies the maximum power in watts that the PSU can draw. default - 96W psu1 - DC-jack psu2 - 2-PIN terminal |
This command is designed specifically for RB5009UPr+S+IN to ensure the safety and optimal performance of the Power Supply Unit (PSU). It allows users to set the maximum power limit for the PSU, preventing potential overload that could compromise the stability and longevity of the system.
Port Settings
PoE-Out can be configured under the menu. Each port can be controlled independently.
...