...
The SXT R comes without modem, it has built-in LTE antenna, two 10/100 Ethernet connectors which support MDI-X auto-detection. There are two micro SIM card slots available, to switch between cell providers.
First use
The default configuration is CPE RouterMode:
*wireless interface connected to providers network (WAN port);
*WAN port is protected by a firewall and enabled DHCP client.
LAN Configuration:
IP Address 192.168.88.1/24 is set on the bridge (LAN port)
DHCP Server enabled;
DNS: enabled.
WAN (gateway) Configuration:
gateway: lte1;
ip4 firewall: enabled;
NAT: enabled.
- Open the bottom lid.
- Install the desired card into miniPCIe slot, please refer to paragraph miniPCIe slot usage.
- Insert the SIM cards into the micro-SIM slots (SIM A slot is a default).
- Connect the device to the power source (see "SXT kit-series#Powering").
- Once the device is powered on and PC connected to the device, open https://192.168.88.1
in your web browser or Winbox to start the configuration. - User name: admin and there is no password by default you will be logged in automatically to the Quick Set screen.
- We recommend clicking the "Check for updates" button on the right side and updating your RouterOS software to the latest version to ensure the best performance and stability. Must have an internet connection and a valid SIM card.
- To manually update the device, please go to our web page and download the latest (MIPSBE) software packages to your PC.
- Open Web browser or Winbox and upload packages to the Files menu and reboot the device.
- Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next time.
- Click on the "Apply Configuration" to save changes.
...