...
Property | Description |
---|---|
add-default-route (yes | no) | Whether to add default route to forward all traffic over the LTE interface. |
apn (string) | Service Provider's Access Point Name |
authentication (pap | chap | none; Default: none) | Allowed protocol to use for authentication |
default-route-distance (integer; Default: 2) | Sets distance value applied to auto created default route, if add-default-route is also selected. LTE route by default is with distance 2 to prefer wired routes over LTE |
ip-type (ipv4 | ipv4-ipv6 auto | ipv6; Default: auto ) | Requested PDN type |
ipv6-interface (; Default: ) | Interface on which to advertise IPv6 prefix |
name (string; Default: ) | APN profile name |
number (integer; Default: ) | APN profile number |
passthrough-interface (; Default: ) | Interface to passthrough IP configuration (activates passthrough) |
passthrough-mac (MAC; Default: auto) | If set to auto, then will learn MAC from first packet |
passthrough-subnet-selection (auto / p2p; Default: auto) | "auto" selects the smallest possible subnet to be used for the passthrough interface. "p2p" sets the passthrough interface subnet as /32 and picks gateway address from 10.177.0.0/16 range. The gateway address stays the same until the apn configuration is changed. |
password (string; Default: ) | Password used if any of the authentication protocols are active |
use-network-apn (yes | no; Default: yes) | Parameter is available starting from RouterOS v7 and used only for MBIM modems. If set to yes, uses network provided APN. |
use-peer-dns (yes | no; Default: yes) | If set to yes, uses DNS recieved from LTE interface |
user (integer) | Username used if any of the authentication protocols are active |
...