...
If RouterOS reset-configuration command is used later, Flashfig configuration is loaded. To permanently overwrite, use the Netinstall process and check Apply default configuration or use -r flag in Linux-based command line.
Flashfig diagram shows the procedure of Flashfig,
A Flashfig A Flashfig video tutorial can find on MikroTik YouTube channel.
...
- If Flashfig is not enabled on your router, access the RouterBOARD with WinboxWinBox/Console and change the boot-device to flash-boot or flash-boot-once-then-nand:
Code Block | ||
---|---|---|
| ||
system/routerboard/settings/set boot-device=flash-boot |
...