CRS310-8G+2S+IN
...
- Update the device by clicking the "Check for updates" button to v6.49.5 or the latest RouterOS software to ensure the best performance and stability. The device needs to have an active internet connection.
- To manually update the device, go to our download page https://mikrotik.com/download
- Choose your architecture (ARM) and download the latest packages from any channel to your PC.
- Open Winbox and upload packages in the Files menu.
- Reboot the device.
- Updating software will ensure the latest security fixes and regulations set by local law.
- Choose your Country.
- Set up your password to secure the device.
...
The IP rating scale for this device is IPX0IP20. The device has no protection from water contamination, please ensure the placement of the device in a dry and ventilated environment.
We recommend shielded Cat5/6 cables for our devices.
The mounting and configuration of this device should be done by a qualified person.
...
The device accepts 18-57 V DC ⎓ from the direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) accepts. The management port accepts 802.3af/at and passive PoE power input (18-57 V DC).
The power consumption of this device under maximum load is up to 20 34 W.
Specifications
- Product code CRS310-1G-5S-4S8G+2S+IN
- CPU 98DX226S 800 MHz
- CPU architecture ARM 32bit
- CPU core count 12
- Size of RAM 256 MB
- RAM type DDR3
- Storage 16 32 MB, Flash
- Number of 1G 2.5G Ethernet ports 18
- Number of 1G SFP ports 5Number of 10G SFP+ ports 42
- Switch chip model 98DX226S
- Dimensions 200 x 166 206,1 x 45 44 mm
- Operating system RouterOS v7, License level 5
- Operating temperature -40°C to +70°C60°C
Configuration
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: https://wikihelp.mikrotik.com/docs/display/wiki/Manual:CRS3xx_series_switchesROS/CRS3xx%2C+CRS5xx%2C+CCR2116%2C+CCR2216+switch+chip+features.
In case the IP connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC address of the device.
The device is equipped with an RS-232 serial port, set by default to 115200 bit/s, 8 data bits, 1 stop bit, and no parity. For recovery purposes, it is possible to boot the device for reinstallation, see the next section.
Buttons and Jumpers
The reset button has these functions:
...