...
Configuration can be altered in the "Settings" tab:
Write Protection
This menu allows you to lock the settings of the tag with a 6-symbol long password:
Once the password is set, there is no way to remove password protection (only to edit it).
The next time you try to configure the tag, you will be notified that it is "write protected" and you can choose either to stay in the "READ-ONLY" mode (which allows you to browse/read through the settings and restricts making configuration changes) or to "UNLOCK" the settings by inputting the configured password:
Beacon settings
In advertising mode, the tag broadcasts information about itself in Bluetooth advertising packets. Information depends on the advertising packet type (the type can be changed in the settings).
...
Eddystone-TLM, Eddystone-UID, MikroTik, and iBeacon.
Eddystone-TLM, Eddystone-UID and iBeacon formats have an option to configure 4 parameters. MikroTik format has an option to configure an additional parameter called "encrypt":
...
:
Property | Description |
---|---|
Advertisement interval (20ms...10s or disable) |
The interval in milliseconds after which an advertisement packet will be broadcasted by the tag |
whether to send an advertisement when the accelerometer (the tag) detects a tilt trigger
. When you have only advertisement interval configured without any triggers enabled → advertisement packets are broadcasted based on the interval time set (each x seconds). |
Freefall |
detect (on/off) |
Whether to send an advertisement packet when |
the tag |
detects a freefall trigger. When the freefall trigger is enabled and the freefalling state is detected → the packet is sent. |
Tilt detect (on/off) |
note: only available for MikroTik format
...
Whether to send an advertisement when the tag detects a tilt trigger. When the tilt trigger is enabled and the device is tilted → the advertisement packet is broadcasted immediately. | |
Impact detect (on/off) | Whether to send an advertisement when the tag detects an impact/wake up trigger. When the impact |
...
trigger is enabled and the device is |
...
pushed/moved → the advertisement packet is sent. | |
Encrypt (on/off) note: only available for MikroTik format | Whether to encrypt the broadcasted hex payload with an "AES" key. When the |
...
"Encrypt" parameter is enabled, the hex payload data (acceleration, temperature, uptime, trigger action, and battery percentage) is encrypted with a private key. This key is known only to the tag's owner (it is obtained with the purchase). | |
- When the impact trigger is enabled and the device is pushed/moved - the advertisement packet is sent at once.
- When encrypt parameter is enabled, the hex payload data (like acceleration, temperature, uptime, trigger action, and battery percentage) is encrypted with a private key. This key is known only to the tag's owner (it is obtained with the purchase).
...