...
| No Format | ||||
|---|---|---|---|---|
| ||||
[admin@MikroTik] > interface/lte/interfacemonitor ltelte1 info lte1 once status: call in progress pin-status: no password required functionality: full manufacturer: Huawei Technologies Co., Ltd. model: ME909u-521 revision: 12.631.07.01.00 current-operator: vodafone ES current-cellid: 44436007 access-technology: Evolved 3G (LTE) signal-strengh: -79 dBm frame-error-rate: n/a earfcn: n/a imei: 860461024123456 imsi: 234012555034981 uicc: n/a rssi: -79dBm rsrp: -109dBm rsrq: -13dB sinr: -1dB status: connected model: EG18-EA revision: EG18EAPAR01A12M4G current-operator: LMT current-cellid: 3103242 enb-id: 12122 sector-id: 10 phy-cellid: 480 data-class: LTE session-uptime: 15m54s imei: 86981604098XXXX imsi: 24701060267XXXX uicc: 8937101122102057XXXX primary-band: B3@20Mhz earfcn: 1300 phy-cellid: 480 dl-modulation: qpsk cqi: 7 ri: 2 mcs: 1 rssi: -68dBm rsrp: -97dBm rsrq: -9dB sinr: 6dB |
Passthrough Example
Starting from RouterOS v6.41 some LTE interfaces support LTE Passthrough feature where the IP configuration is applied directly to the client device. In this case modem firmware is responsible for the IP configuration and router is used only to configure modem settings - APN, Network Technologies and IP-Type. In this configuration the router will not get IP configuration from the modem. The LTE Passthrough modem can pass both IPv4 and IPv6 addresses if that is supported by modem. Some modems support multiple APN where you can pass the traffic from each APN to a specific router interface.
...