Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Yellow - partially working
  • Green - Working
  • Red - Not working at the moment

Feature

v7.1v7.2v7.3v7.6v7.7v7.10v7.12
Winbox       
BGP support






OSPF support






RIP support






Router ID support






Routing filter support














Generic       
/31 address supportN/A
Routed traffic does not work to odd address.



Convert route rules after upgrade from v6.x






Static IPv6 upgrade from ROS v6






IPv4 Route Rules






IPv6 Route Rules






ECMP flags






dst@table






gateway@table






gateway%interface






recursive route over ipv6 LL address






3 level recursive gateway with ECMP 






IPV6 ECMP






IPv6 connected ECMP






Addresses from same subnet to multiple interfacesN/A





Show time when route was last updatedN/A





Check GatewayBFD not ready





Scope and target scope






IPv4 Mangle routing-mark






IPv6 Mangle routing-mark






Packet SRC addressDoes not work correctly with /32 addresses





Routing-table parameter for ping and telnet






Show if route is hardware acceleratedShows if route is candidate for HW acceleration





Custom route selection policy 






IPv4 with IPv6 nexthops for RFC5549














Routing id






VRF






Management services support for VRFs telnet, ssh, api, www services can be set to listen on specific VRF





Some kind of mechanism to import/export routes from one vrf to another within same routerN/A





BFDN/A



Initial support








OSPF       
Convert OSPF config from v6 to v7 after upgrade

Known conversion problems:

  • NBMA neighbors place in backbone
  • ospf-v2 networks + interface may have issues

  • dynamic interfaces may have issues

  • MPLS PE CE features are not converted







OSPF neighbors in NSSA Area






OSPF in broadcast network






OSPF with routing filters






OSPF Virtual Link






OPSF input filtering






HMAC-SHA auth RFC5709N/A

Initial support


OSPF SNMP monitoringN/A





BGP SNMP monitoring




For ipv4 sessions








IS-IS






IPv4





Initial support
IPv6






Traffic Engineering














BGP       
Convert BGP config from v6 to v7 after upgrade






BGP Templates and dynamic peers






BGP connect listen on a network






BGP guess remote.as






Show from which peer route receivedOK ( /routing/route/print detail --> belongs-to)





BGP Address Families






BGP input.accept-*






eBGP nexthop self






Input Filter






Output Filter






BGP Local address auto selection






BGP route reflect






BGP route server






BGP Roles
https://datatracker.ietf.org/doc/draft-ietf-idr-bgp-open-policy/?include_text=1
rfc roles not fully implemented





BGP session uptime in "established" state






BGP session last established time














BGP Flow SpecFlow spec attributes are forwarded





BGP Selection














BGP Selection (Multipath)N/A





BGP Confederation






BGP AggregationN/A





BGP ORFN/A





Discard prefix RTBH  RFC 6666N/A





AS-wide Unique BGP Identifier RFC 6286N/A





Exported PDU PCAP saver






Exported PDU PCAP loader






BGP Advertisement monitoring
Initial implementation by dumping to pcap
Advertisements rework


BGP Prefix limit

Initial support



BGP advertise IPv4 prefix with IPv6 nexthop (RFC5549)






BGP VPNv6 support




Prerequisites are made, need to add actual BGP Afi








MPLS       
Static label mapping






Static mapping upgrade from v6






LDP IPv4 mapping






LDP IPv6 mapping






LDP signaled VPLS






LDP config upgrade from v6






LDP Dual Stack






TE






TE Config upgrade from v6






VPLS Encap to TE






BGP signaled VPLS






VPLS config upgrade from v6






Fast reroute






MPLS ECMP






One label per VRF






Ability to use MPLS EXP-bit in QueuesN/A





MPLS Fast-PathN/A













RPKI session






RPKI possibility to view received info of specific prefix






RPKI show connection status














Filters       
Convert routing filters after upgrade from v6.x






Syntax completion






Routing filter chain drop by default without rules






Routing filter prefix match






Routing filter protocol match






Routing filter append communities






Routing filter append large community






Routing filter set weight






Routing filter set local pref






Routing filter set MED






Routing filter set origin






Routing filter set igp metric from OSPF cost






Routing filter match prefix with address list






Routing filter match community/large community lists






Routing filter add a prefix to address listN/A





Routing filter validate prefix with RPKI














Multicast       
IGMP-Proxy






PIM-SMInitial support







Performance Status


Used hardware:

...