...
Screw both antennas to the SMA sockets (Follow the instructions in the illustrations).
Info |
---|
An external antenna needs to be connected to ANT2 and ANT3 SMA connectors, where ANT3 is the main, and ANT2 diversity. |
Removing the back cover to access PCB
In case there is a need to access PCB, the back cover can be removed.
- Remove the center screw;
- Use a small screwdriver to pry open the backplate in marked spots;
- Continue to pry it open by going up;
- At the end lift off the whole backplate.
...