Versions Compared

Old Version 2

changes.mady.by.user Oskars K.

Saved on

compared with

New Version 3

changes.mady.by.user Oskars K.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

This device needs to be upgraded to RouterOS v6.4446. 6 or the latest version to ensure compliance with local authority regulations.

...

Note. The information contained here is subject to change. Please visit the product page on www.mikrotik.com for the most up to date version of this document.

Quickstart

Default configuration:

  • *WAN port is protected by a firewall and enabled DHCP client
  • *Wireless and Ethernet interfaces (except WAN port/s) are part of LAN bridge
  • LAN Configuration: 
    The IP address 192.168.88.1/24 is set on the bridge (LAN port)
    DHCP Server: enabled;
    DNS: enabled;
  • wlan1 Configuration:
    mode: ap-bridge;
    band: 2ghz-b/g/n;
    tx-chains: 0;1;
    rx-chains: 0;1;
    installation: outdoor;
    ht-extension: 20/40mhz-XX;
  • wlan2 Configuration:
    mode: ap-bridge;
    band: 5ghz-a/n/ac;
    tx-chains: 0;1;
    rx-chains: 0;1;
    installation: outdoor;
    ht-extension: 20/40/80mhz-XXXX;
  • WAN (gateway) Configuration:
    gateway: ether1;
    ip4 firewall: enabled;
    NAT: enabled;
    DHCP Client: enabled;


  • Use a Phillips head screwdriver to loosen the screw, which secures the bottom lid (see wAP ac-series).
  • Insert the SIM card into the slot with the chip facing up.
  • Choose your powering solution, please see the wAP ac-series section for possibilities.
  • Open network connections on your PC and search for
  • Use a Phillips head screwdriver to loosen the screw, which secures the bottom lid (see wAP ac-series).
  • Choose your powering solution, please see the wAP ac-series section for possibilities.
  • Plug the included PoE injector into the ISP outlet and attach an Ethernet cable to it. Connect the other end of the Ethernet cable to this MikroTik router. Plug the provided power supply into the PoE injector.
  • Wireless AP mode is enabled by default, you can connect from your computer to the SSID that begins with "MikroTik". The configuration interface is available via a web browser. The address is https://192.168.88.1Image Removed. 
  • Connect to the wireless network, open https://192.168.88.1 in your web browser to start the configuration.
  • User name: admin and there is no password by default you will be logged in automatically to the Quick Set screen.
  • Click Update the device by clicking the "Check for updates" button on the right side and updating your RouterOS software to the latest version to ensure the best performance and stability. Must have a valid SIM card inserted.
  • To manually update the device, please go https://mikrotik.com/download
  • Choose ARM packages for this device and download it to your PC.
  • Upload downloaded packages to the WebFig "Files" menu and reboot the device. 
  • Updating your RouterOS software to the latest version will ensure the best performance, stability, and security updates.
  • To personalize your wireless network, SSID can be changed in the fields "Network Name";
  • Choose your country on the left side of the screen in the field "Country", to apply country regulation settings.
  • Set up your wireless network password in the field "WiFi Password" the password must be at least eight symbols.
  • Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next time.
  • Click on the "Apply Configuration" to save changes.

...