...
Connecting to the antenna
When installing outdoors please ensure that the device case is waterproof and is designed for outdoor use. The IP rating scale for this device is IP0.
The mounting and configuration of this device should be done by a qualified person.
You can use UFL or MMCX connectors.
| Info |
|---|
If your device does not have internal antennas, it is possible to connect to the external antennas by adding cable connectors, product code – ACSMAUFL. https://mikrotik.com/product/acsmaufl We recommend using TOF-2400-8V-4 Omni antenna |
...
When using UFL connector, attach the antenna cable to the connector
...
shown below:
When using MMCX connector, attach the antenna cable to the connector shown below:
After you attach the antenna, you can turn the device on. Make sure that the right connector is used by the module in the software settings.
In order to do that, go to the device's GUI and check which connector is used under "LoRa>Devices>"Double-click" on the gateway>Under the "Antenna" section:
installing outdoors please ensure that the device case is waterproof and is designed for outdoor use. The IP rating scale for this device is IP0.
The mounting and configuration of this device should be done by a qualified person.
Configuration for RouterOS
...