Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Open cover (see Opening cover).
  2. Connect the Ethernet cable from your PC to the Ethernet port.
  3. Plug the device into the power source (see Powering).
  4. Download the Winbox (see Configuration).
  5. Open and search the MAC address in the Neighbors tab.
  6. Click on the MAC address and connect.
  7. The username is admin and there is no password (or, for some models, check user and wireless passwords on the sticker). The default IP address from the Ethernet port is 192.168.88.1 for configuration if connecting without WinBox, then set the IP address of your computer to 19.168.88.2.
  8. Update the device to the latest RouterOS version, make sure that the device has an internet connection https://mt.lv/configuration.
  9. Set a Country, to make sure local regulations are observed.
  10. Set the antenna gain, depending on the antenna used.
  11. Set up your password.
  12. To manually update the device, please go to https://mikrotik.com/download.
  13. Choose (ARM) packages for this device and download them to your PC.
  14. Upload downloaded packages to the (Winbox) (Files) menu and reboot the device.
  15. Updating your RouterOS software to the latest version will ensure the best performance, stability, and security updates, https://mt.lv/upgrade.

...

ModelFCC ID
RBD22UGS-5HPacD2HnD-15STV7D2352AC

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.Image Added

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

...

instruction manual, may cause harmful interference to radio communications.

...

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

...