...
Download the WireGuard application from the App Store. Open it up and create a new configuration from scratch.
First of all give your connection a "Name" and choose to generate a keypair. The generated public key is necessary for peer's configuration on RouterOS side.
Specify an IP address in "Addresses" field that is in the same subnet as configured on the server side. This address will be used for communication. For this example, we used 192.168.100.1/24 on the RouterOS side, you can use 192.168.100.2 here.
If necessary, configure the DNS servers. If allow-remote-requests is set to yes under IP/DNS section on the RouterOS side, you can specify the remote WireGuard IP address here.
Click "Add peer" which reveals more parameters.
...
"Allowed IPs" are set to 0.0.0.0/0 to allow all traffic to be sent over the WireGuard tunnel.
