...
This Device accepts input of 24V DC power adapter, which is provided in the original packaging of this device.
First steps:
- Connect your external antenna to the SMA connector. Connect your ISP cable to the device. Connect the device to the power source with the provided adapter.
- Open network connections on your PC and search for MikroTik wireless network and connect to it.
- Once connected to the wireless network, open https://192.168.88.1 in your web browser to start configuration, user name: admin and there is no password by default.
- Update the device to the latest software version by clicking check for updates, the device will reboot after the new version is installed. Repeat the login procedure.
- Depending on the antenna used, you must set its gain in the Quickset menu. This is to ensure that EIRP meets the limit set by the local authorities. Set up your router password in the bottom field “Password” to the right and repeat it in the field “Confirm Password”. This will be used to login next time. Click on the “Apply Configuration” to save changes.
Safety Information:
| Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts. |
Use only the power supplyand accessories approved by the manufacturer, and which can befoundin the original packaging of this product. | |
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device. | |
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the correct hardware and configuration or to follow the correct procedures could result in a hazardous situation to people and damage to the system. | |
| We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk! | |
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures. | |
In case of device failure, please disconnect it from power. Fastest way to do so is by unplugging power adapter from power outlet. |
- Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.
- Use only the power supplyand accessories approved by the manufacturer, and which can befoundin the original packaging of this product.
- This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
- This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the correct hardware and configuration or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
- We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
- This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures.
- In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging power adapter from the power outlet.
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC and European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 375 centimeters from your body, occupational user or the general public.
...