Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Needs more testing

Feature

v7.1v7.2v7.3
Winbox


BGP support


OSPF support


RIP support


Router ID support


Routing filter support






Generic


/31 address supportN/A
Routed traffic does not work to odd address.
Convert route rules after upgrade from v6.x


Static IPv6 upgrade from ROS v6


IPv4 Route Rules


IPv6 Route Rules


ECMP flags


dst@table


gateway@table


gateway%interface


recursive route over ipv6 LL address


3 level recursive gateway with ECMP 


IPV6 ECMP


IPv6 connected ECMP


Addresses from same subnet to multiple interfacesN/A

Show time when route was last updatedN/A

Check GatewayBFD not ready

Scope and target scope


IPv4 Mangle routing-mark


IPv6 Mangle routing-mark


Packet SRC addressDoes not work correctly with /32 addresses

Routing-table parameter for ping and telnet


Show if route is hardware acceleratedShows if route is candidate for HW acceleration

Custom route selection policy 


IPv4 with IPv6 nexthops and RFC5549






Routing id


VRF


Management services support for VRFs telnet, ssh, api, www services can be set to listen on specific VRF

Some kind of mechanism to import/export routes from one vrf to another within same routerN/A

BFDN/A





OSPF


Convert OSPF config from v6 to v7 after upgrade

Known conversion problems:

  • NBMA neighbors place in backbone
  • ospf-v2 networks + interface may have issues

  • dynamic interfaces may have issues

  • MPLS PE CE features are not converted



OSPF neighbors in NSSA Area


OSPF in broadcast network


OSPF with routing filters


OSPF Virtual Link


OPSF input filtering


HMAC-SHA auth RFC5709N/A

BGP and OSPF SNMP monitoringN/A





BGP


Convert BGP config from v6 to v7 after upgrade


BGP Templates and dynamic peers


BGP connect listen on a network


BGP guess remote.as


Show from which peer route receivedOK ( /routing/route/print detail --> belongs-to)

BGP Address Families


BGP input.accept-*


eBGP nexthop self


Input Filter


Output Filter


BGP Local address auto selection


BGP route reflect


BGP route server


BGP Roles
https://datatracker.ietf.org/doc/draft-ietf-idr-bgp-open-policy/?include_text=1
rfc roles not fully implemented

BGP session uptime in "established" state






BGP Flow SpecFlow spec attributes are forwarded

BGP Selection






BGP Selection (Multipath)N/A

BGP Confederation


BGP AggregationN/A

BGP ORFN/A

Discard prefix RTBH  RFC 6666N/A

AS-wide Unique BGP Identifier RFC 6286N/A

Exported PDU PCAP saver


Exported PDU PCAP loader


BGP Advertisement monitoring
Initial implementation by dumping to pcap
BGP Prefix limit

Initial support




MPLS


Static label mapping


Static mapping upgrade from v6


LDP IPv4 mapping


LDP IPv6 mapping


LDP signaled VPLS


LDP config upgrade from v6


LDP Dual Stack


TE


TE Config upgrade from v6


VPLS Encap to TE


BGP signaled VPLS


VPLS config upgrade from v6


Fast reroute


MPLS ECMP


One label per VRF


Ability to use MPLS EXP-bit in QueuesN/A

MPLS Fast-PathN/A





RPKI session


RPKI possibility to view received info of specific prefix


RPKI show connection status






Filters


Convert routing filters after upgrade from v6.x


Syntax completion


Routing filter chain drop by default without rules


Routing filter prefix match


Routing filter protocol match


Routing filter append communities


Routing filter append large community


Routing filter set weight


Routing filter set local pref


Routing filter set MED


Routing filter set origin


Routing filter set igp metric from OSPF cost


Routing filter match prefix with address list


Routing filter match community/large community lists


Routing filter add a prefix to address listN/A

Routing filter validate prefix with RPKI






Multicast


IGMP-Proxy


PIM-SM


...