...
For more info refer to the /routing/rpki RPKI documentation.
RIP Configuration
To start RIP, the instance should be configured. There you should select which routes will be redistributed by RIP and if it will redistribute the default route.
...
| Code Block | ||
|---|---|---|
| ||
/routing/rip/instance |
...
add name=instance1 originate-default=never redistribute=connected,static |
Then interface-template should be configured. There is no need to define networks in ROS version 7 as it was in version 6.
...
| Code Block | ||
|---|---|---|
| ||
/routing/rip/interface-template |
...
add interfaces=ether1 instance=instance1 |
Now the basic configuration is completed on one router. RIP neighbor router should be configured in a similar way.
In ROS v7 the neighbors will appear only when there are routes to be sent or/and to be received.
Prefix lists from ROSv6 are deprecated, now all the filtering must be done by the routing filters.