The RouterBOARD RBMetalG-52SHPacn Metal comes preinstalled in an outdoor case, with a built-in wireless interface, an N-Male antenna connector, and one 10/100/1000 Ethernet connector which supports MDI-X auto-detection. The device is packaged with a 24 V power adapter, a PoE injector, and two mounting loops. Several models are available (dual-band, single band, AP and CPE variants).

Connecting

1. Connect the antenna to the N-Male connector (see "14221767");
2. Open the cover of the Ethernet port (see "14221767");
3. Guide your cable through the cover and connect to the Ethernet port. (see "14221767");
4. The device accepts 10-30 V Passive PoE from a PoE injector. The included injector should be connected with the "Data" end into a PC, the "Data + Power" port should be connected to the device, by using an Ethernet cable of the desired length (not included);
5. Use the provided rubber insulator to put on the Ethernet cable, and push it into the case opening, so that the opening is tightly closed;
6. Download the configuration tool https://mt.lv/winbox;
7. Open WinBox Neighbors tab;
8. Search for the device and connect using MAC address;
9. Default IP: 192.168.88.1, user name: admin, no password;
10. Download the latest RouterOS software from https://mikrotik.com/download;
11. Choose MIPSBE packages, and save them to your PC;
12. Open WinBox and upload downloaded packages, drag and drop into any windows;
13. Restart the device;
14. Connect again and in QuickSet menu set your Country, to apply country regulation settings;
15. Secure your device and set a strong password;

MikroTik mobile app

Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.

Image Removed

1. Scan QR code and choose your preferred OS.
2. Install and open applications.
3. By default, the IP address and user name will be already entered.
4. Click Connect to establish a connection to your device through a wireless network.
5. Choose Quick setup and application will guide you through all basic configuration settings in a couple of easy steps.
6. An advanced menu is available to fully configure all necessary settings.

Powering

The device accepts powering from an Ethernet port (Passive PoE). Under maximum load, the power consumption of this device is 11 W.
Connecting to a PoE Adapter:

1. Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter.
2. Connect an Ethernet cable from your local network (LAN) to the PoE adapter.
3. Connect the power cord to the adapter, and then plug the power cord into a power outlet.

Configuration

RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: https://mt.lv/help^{Image Removed}.
In case IP connection is not available, the Winbox tool (https://mt.lv/winbox^{Image Removed}) can be used to connect to the MAC address of the device from the LAN side (all access is blocked from the internet port by default).

Mounting

The device is to be mounted vertically so that the Ethernet cable points downwards.

If you wish to tighten the device to a pole, you can do it with the provided mounting loops. The device comes bundled with two mounting loops – guide the loops around the device through the provided edge markings, and around the pole where it will be mounted.

An electric tape can be used to increase friction between materials use it between clamps and the mounting surface. It will help to hold the device in place. The mounting hose clamp is provided with the package.

Image Removed

1. Guide hose clamp through the opening on the back of the device.
2. Attach to the pole or mast.
3. Align and secure by hose clamp screw using PH2 screwdriver.

The device should be placed by the antenna facing upwards.
You should avoid connecting a loose Ethernet cable to the Ethernet port, secure the cable to a wall or the pole, so that the cable weight is not pulling the port. It is recommended to secure the Ethernet cable less than 2m from the device. This is to ensure that the cable doesn't damage the port by its weight or doesn't fall out.

Opening Ethernet cover

Image Removed

1. To open the cover, release clips for both fasteners and cover will be free to open.
2. Guide your Ethernet cable through the rubber seal in the cover opening.
3. Crimp RJ-45 connector on the cable and connect with Ethernet port.

Antenna usage

...

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the correct hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.

Connecting

1. Connect the antenna to the N-Male connector (see "Antenna usage");
2. Open the cover of the Ethernet port (see "Opening Ethernet cover");
3. Guide your cable through the cover and connect to the Ethernet port. (see "Opening Ethernet cover");
4. The device accepts 10-30 V Passive PoE from a PoE injector. The included injector should be connected with the "Data" end into a PC, the "Data + Power" port should be connected to the device, by using an Ethernet cable of the desired length (not included);
5. Use the provided rubber insulator to put on the Ethernet cable, and push it into the case opening, so that the opening is tightly closed;
6. Download the configuration tool https://mt.lv/winbox;
7. Open WinBox Neighbors tab;
8. Search for the device and connect using MAC address;
9. Default IP: 192.168.88.1, user name: admin, no password;
10. Download the latest RouterOS software from https://mikrotik.com/download;
11. Choose MIPSBE packages, and save them to your PC;
12. Open WinBox and upload downloaded packages, drag and drop into any windows;
13. Restart the device;
14. Connect again and in QuickSet menu set your Country, to apply country regulation settings;
15. Secure your device and set a strong password;

MikroTik mobile app

Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.

Image Added

1. Scan QR code and choose your preferred OS.
2. Install and open applications.
3. By default, the IP address and user name will be already entered.
4. Click Connect to establish a connection to your device through a wireless network.
5. Choose Quick setup and application will guide you through all basic configuration settings in a couple of easy steps.
6. An advanced menu is available to fully configure all necessary settings.

Powering

The device accepts powering from an Ethernet port (Passive PoE). Under maximum load, the power consumption of this device is 11 W.
Connecting to a PoE Adapter:

1. Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter.
2. Connect an Ethernet cable from your local network (LAN) to the PoE adapter.
3. Connect the power cord to the adapter, and then plug the power cord into a power outlet.

Configuration

RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: https://mt.lv/help^{Image Added}.
In case IP connection is not available, the Winbox tool (https://mt.lv/winbox^{Image Added}) can be used to connect to the MAC address of the device from the LAN side (all access is blocked from the internet port by default).

Mounting

The device is to be mounted vertically so that the Ethernet cable points downwards.

If you wish to tighten the device to a pole, you can do it with the provided mounting loops. The device comes bundled with two mounting loops – guide the loops around the device through the provided edge markings, and around the pole where it will be mounted.

An electric tape can be used to increase friction between materials use it between clamps and the mounting surface. It will help to hold the device in place. The mounting hose clamp is provided with the package.

Image Added

1. Guide hose clamp through the opening on the back of the device.
2. Attach to the pole or mast.
3. Align and secure by hose clamp screw using PH2 screwdriver.

The device should be placed by the antenna facing upwards.
You should avoid connecting a loose Ethernet cable to the Ethernet port, secure the cable to a wall or the pole, so that the cable weight is not pulling the port. It is recommended to secure the Ethernet cable less than 2m from the device. This is to ensure that the cable doesn't damage the port by its weight or doesn't fall out.

Opening Ethernet cover

Image Added

1. To open the cover, release clips for both fasteners and cover will be free to open.
2. Guide your Ethernet cable through the rubber seal in the cover opening.
3. Crimp RJ-45 connector on the cable and connect with Ethernet port.

Antenna usage

Attach antenna by screwing it to the connector located on the device.
Image Added
Please connect and disconnect the antenna, when the device is turned off!

Reset button

The reset button has three functions:

• Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds).
• Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10 seconds).
• Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RBMetalG-52SHPacn look for Netinstall servers (total 15 seconds).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Specifications

For more information about this product, specification and pictures please visit our web page: https://mikrotik.com/product/RBMetalG-52SHPacn
RBMetalG-52SHPacn-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
RBMetalG-52SHPacn (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

Accessories

Package includes the following accessories that come with the device:

• EU/US Switching Power Supply 24 V ⎓ 0.8A, 19.2 W.
• 2.4Ghz/5Ghz Dual Band OMNI Antenna 6 dBi for N FEMALE, Grey color, PVC housing, 285 mm length.
• Gigabit POE injector.
• Plastic tie strap fastener 2 pcs.
• Hose clamp 50 / 70 2 pcs.
• N-Male to N-Female Right Angle Adapter.

Operating system support

The device supports RouterOS software version 6.46. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the Image Addedlimits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter.

Antenna Installation. WARNING: It is the installer's responsibility to ensure that when using the authorized antennas in the United States (or where FCC rules apply); only those antennas certified with the product are used. The use of any antenna other than those certified with the product is expressly forbidden in accordance with FCC rules CFR47 part 15.204. The installer should configure the output power level of antennas, according to country regulations and per antenna type. Professional installation is required for equipment with connectors to ensure compliance with health and safety issues.
LIST OF APPROVED 2.4 GHz ANTENNAS:
• 24 dBi Dish DC 24-HD-PFIP
• 20 dBi Panel WLP-2450-20
• 17 dBi Sector SA 24-90-17-WB
• 15 dBi Omni Directional (pole) WL0-2450-15
• 13 dBi Omni Directional (hor. Polarization) HP, 0DH 24-13
LIST OF APPROVED 5GHz ANTENNAS:
• 8.5 dBi Omni MTI Wireless MT-482016NA
• 24 dBi Panel Pacific Wireless PA58-24
• 32 dBi Dish Pacific Wireless HDDA5W-32-DP
Antennas of the same type and lower gain than those listed above may be used in compliance with certification.

Innovation, Science and Economic Development Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter

Reset button

The reset button has three functions:

• Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds).
• Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10 seconds).
• Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15 seconds).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Specifications

For more information about this product, specification and pictures please visit our web page: https://mikrotik.com/product/RBMetalG-52SHPacn
RBMetalG-52SHPacn-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
RBMetalG-52SHPacn (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

Accessories

Package includes the following accessories that come with the device:

• EU/US Switching Power Supply 24 V ⎓ 0.8A, 19.2 W.
• 2.4Ghz/5Ghz Dual Band OMNI Antenna 6 dBi for N FEMALE, Grey color, PVC housing, 285 mm length.
• Gigabit POE injector.
• Plastic tie strap fastener 2 pcs.
• Hose clamp 50 / 70 2 pcs.
• N-Male to N-Female Right Angle Adapter.

Operating system support

The device supports RouterOS software version 6.46. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested.

Federal Communication Commission Interference Statement
FCC ID: TV7MTLG52SHPN. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter.
IMPORTANT: Exposure to Radio Frequency Radiation. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
Antenna Installation. WARNING: It is the installer's responsibility to ensure that when using the authorized antennas in the United States (or where FCC rules apply); only those antennas certified with the product are used. The use of any antenna other than those certified with the product is expressly forbidden in accordance with FCC rules CFR47 part 15.204. The installer should configure the output power level of antennas, according to country regulations and per antenna type. Professional installation is required for equipment with connectors to ensure compliance with health and safety issues.
LIST OF APPROVED 2GHz ANTENNAS:
• 24 dBi Dish DC 24-HD-PFIP
• 20 dBi Panel WLP-2450-20
• 17 dBi Sector SA 24-90-17-WB
• 15 dBi Omni Directional (pole) WL0-2450-15
• 13 dBi Omni Directional (hor. Polarization) HP, 0DH 24-13
LIST OF APPROVED 5GHz ANTENNAS:
• 8.5 dBi Omni MTI Wireless MT-482016NA
• 24 dBi Panel Pacific Wireless PA58-24
• 32 dBi Dish Pacific Wireless HDDA5W-32-DP
Antennas of the same type and lower gain than those listed above may be used in compliance with certification.

Industry Canada

7442A-MG52SHPAC. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

CE Declaration of Conformity

Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.

...

BG

...

С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение RouterBOARD е в съответствие с Директива 2014/53/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес:

https://mikrotik.com/products^{Image Removed}

...

CS

...

Tímto Mikrotīkls SIA prohlašuje, že typ rádiového zařízení RouterBOARD je v souladu se směrnicí 2014/53/EU. Úplné znění EU prohlášení o shodě je k dispozici na této internetové adrese:

https://mikrotik.com/products^{Image Removed}

...

DA

...

Hermed erklærer Mikrotīkls SIA , at radioudstyrstypen RouterBOARD er i overensstemmelse med direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse:

https://mikrotik.com/products^{Image Removed}

...

DE

...

Hiermit erklärt Mikrotīkls SIA , dass der Funkanlagentyp RouterBOARD der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar:

https://mikrotik.com/products^{Image Removed}

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-003 (B) / NMB-003 (B)

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

UKCA marking

Image Added

Eurasian Conformity Mark

*Доступные частотные каналы могут различаться в зависимости от модели продукта и сертификации. 

Информация о дате изготовления устройства указана в конце серийного номера на его наклейке через дробь. Первая цифра означает номер года (последняя цифра года), две последующие означают номер недели.

Изготовитель: Mikrotikls SIA, Aizkraukles iela 23, Riga, LV-1006, Латвия, support@mikrotik.com. Сделано в Китае, Латвии или Литве. Cм. на упаковке.

...

EL

Με την παρούσα ο/η Mikrotīkls SIA , δηλώνει ότι ο ραδιοεξοπλισμός RouterBOARD πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο:

Для получения подробных сведений о гарантийном обслуживании обратитесь к продавцу. Информация об импортерах продукции MikroTik в Российскую Федерацию: 

https://mikrotik.com

...

/buy/europe/russia

Продукты MikroTik, которые поставляются в Евразийский таможенный союз, оцениваются с учетом соответствующих требований и помечены знаком EAC, как показано ниже:

Image Added

Norma Oficial Mexicana

Rango de frecuencia (potencia de salida máxima): 2400-2483.5 MHz (30 dBm), 5725-5850 MHz (30 dBm). Los canales de frecuencia disponibles pueden variar según el modelo y la certificación del producto.

EFICIENCIA ENERGETICA CUMPLE CON LA NOM-029-ENER-2017.

La operacion de este equipo esta sujeta a las siguientes dos condiciones:

• Es posible que este equipo o dispositivo no cause interferencia perjudicial y.
• Este equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacion no deseada.

Fabricante: Mikrotikls SIA, Brivibas gatve 214i, Riga, LV-1039, Latvia.

País De Origen: Letonia; Lituania; China (Republica Popular); Estados Unidos De America; Mexico.

...

EN

...

Hereby, Mikrotīkls SIA declares that the radio equipment type RouterBOARD is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://mikrotik.com/products^{Image Removed}

...

ES

...

Por la presente, Mikrotīkls SIA declara que el tipo de equipo radioeléctrico RouterBOARD es conforme con la Directiva 2014/53/UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente:

https://mikrotik.com/products^{Image Removed}

...

ET

...

Käesolevaga deklareerib Mikrotīkls SIA , et käesolev raadioseadme tüüp RouterBOARD vastab direktiivi 2014/53/EL nõuetele. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil:

https://mikrotik.com/products^{Image Removed}

...

FI

Mikrotīkls SIA vakuuttaa, että radiolaitetyyppi RouterBOARD on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa:

Por favor contacte a su distribuidor local para preguntas regionales específicas. La lista de importadores se puede encontrar en nuestra página de inicio – 

https://mikrotik.com/buy/latinamerica/mexico.

CE Declaration of Conformity

Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.

/products^{Image Removed}

BG	С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение RBMetalG-52SHPacn е в съответствие с Директива	FR	Le soussigné, Mikrotīkls SIA , déclare que l'équipement radioélectrique du type RouterBOARD est conforme à la directive 2014/53/UE. Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante:ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес:https://mikrotik.com/productsImage Modified
HRCS	Tímto Mikrotīkls SIA ovime izjavljuje da je radijska oprema tipa RouterBOARD u skladu s Direktivom prohlašuje, že typ rádiového zařízení RBMetalG-52SHPacn je v souladu se směrnicí 2014/53/EU. Cjeloviti tekst Úplné znění EU izjave prohlášení o sukladnosti dostupan shodě je na sljedećoj internetskoj adresik dispozici na této internetové adrese: https://mikrotik.com/productsImage Modified
HUDA	Hermed erklærer Mikrotīkls SIA igazolja, hogy a RouterBOARD típusú rádióberendezés megfelel a , at radioudstyrstypen RBMetalG-52SHPacn er i overensstemmelse med direktiv 2014/53/EU irányelvnek. Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címenEU-overensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse: https://mikrotik.com/products
DE	Hiermit erklärt Mikrotīkls SIA , dass der Funkanlagentyp RBMetalG-52SHPacn der Richtlinie	IT	Il fabbricante, Mikrotīkls SIA , dichiara che il tipo di apparecchiatura radio RouterBOARD è conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo InternetEU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: https://mikrotik.com/products
EL	Με την παρούσα ο/η Mikrotīkls SIA , δηλώνει ότι ο ραδιοεξοπλισμός RBMetalG-52SHPacn πληροί την οδηγία	IS	Hér með lýsir Mikrotīkls SIA því yfir að RouterBOARD er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU. Fullur texti ESB samræmisyfirlýsingar er að finna á eftirfarandi veffangi:ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο:https://mikrotik.com/productsImage Modified
LTEN	AšHereby, Mikrotīkls SIA , patvirtinu, kad radijo įrenginių tipas RouterBOARD atitinka Direktyvą declares that the radio equipment type RBMetalG-52SHPacn is in compliance with Directive 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas šiuo interneto adresuEU. The full text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products
ES	Por la presente, Mikrotīkls SIA declara que el tipo de equipo radioeléctrico RBMetalG-52SHPacn es conforme con la Directiva	LV	Ar šo Mikrotīkls SIA deklarē, ka radioiekārta RouterBOARD atbilst Direktīvai 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē:UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente:https://mikrotik.com/productsImage Modified
ET	Käesolevaga deklareerib	MT	B'dan, Mikrotīkls SIA , niddikjara li dan it-tip ta' tagħmir tar-radju RouterBOARD huwa konformi mad-Direttiva et käesolev raadioseadme tüüp RBMetalG-52SHPacn vastab direktiivi 2014/53/UE. It-test kollu tad-dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ġejEL nõuetele. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil: https://mikrotik.com/products
NLFI	Hierbij verklaar ik, Mikrotīkls SIA , dat het type radioapparatuur RouterBOARD conform is met Richtlijn vakuuttaa, että radiolaitetyyppi RBMetalG-52SHPacn on direktiivin 2014/53/EU mukainen. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadresEU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: https://mikrotik.com/products
NOFR	Mikrotīkls SIA erklærer herved at utstyret RouterBOARD er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv Le soussigné, Mikrotīkls SIA , déclare que l'équipement radioélectrique du type RBMetalG-52SHPacn est conforme à la directive 2014/53/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse:UE. Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante:https://mikrotik.com/productsImage Modified
PLHR	Mikrotīkls SIA niniejszym oświadcza, że typ urządzenia radiowego RouterBOARD jest zgodny z dyrektywą ovime izjavljuje da je radijska oprema tipa RBMetalG-52SHPacn u skladu s Direktivom 2014/53/UEEU. Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem internetowym:Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj internetskoj adresi:https://mikrotik.com/productsImage Modified
HU	Mikrotīkls SIA igazolja, hogy a RBMetalG-52SHPacn típusú rádióberendezés megfelel a	PT	O(a) abaixo assinado(a) Mikrotīkls SIA declara que o presente tipo de equipamento de rádio RouterBOARD está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet:EU irányelvnek. Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen:https://mikrotik.com/productsImage Modified
ROIT	Prin prezentaIl fabbricante, Mikrotīkls SIA declară că tipul de echipamente radio RouterBOARD este în conformitate cu Directiva , dichiara che il tipo di apparecchiatura radio RBMetalG-52SHPacn è conforme alla direttiva 2014/53/UE. Textul integral al declarației UE de conformitate este disponibil la următoarea adresă internet:Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet:https://mikrotik.com/productsImage Modified
SKIS	Mikrotīkls SIA týmto vyhlasuje, že rádiové zariadenie typu RouterBOARD je v súlade so smernicou Hér með lýsir Mikrotīkls SIA því yfir að RBMetalG-52SHPacn er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adreseEU.Fullur texti ESB samræmisyfirlýsingar er að finna á eftirfarandi veffangi: https://mikrotik.com/products
SLLT	Aš, Mikrotīkls SIA potrjuje, da je tip radijske opreme RouterBOARD skladen z Direktivo , patvirtinu, kad radijo įrenginių tipas RBMetalG-52SHPacn atitinka Direktyvą 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu:ES. Visas ES atitikties deklaracijos tekstas prieinamas šiuo interneto adresu:https://mikrotik.com/productsImage Modified
SVLV	Härmed försäkrar Mikrotīkls SIA att denna typ av radioutrustning RouterBOARD överensstämmer med direktiv Ar šo Mikrotīkls SIA deklarē, ka radioiekārta RBMetalG-52SHPacn atbilst Direktīvai 2014/53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress:ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē:https://mikrotik.com/productsImage Modified

MPE statement

This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body, unless specifically stated otherwise in page 1 of this document. In RouterOS you must specify your country, to make sure local wireless regulations are observed.

Frequency bands terms of use

...

Frequency range (for applicable models)

...

Channels used

...

Maximum Output Power (EIRP)

...

Restriction

...

2412-2472 MHz

...

1 - 13

...

20 dBm

...

Without any restriction to use in all EU Member States

...

5150-5250 MHz

...

26 - 48

...

23 dBm

...

Restricted to indoor use only*

...

5250-5350 MHz

...

52 - 64

...

20 dBm

...

Restricted to indoor use only*

...

5470-5725 MHz

...

100 - 140

...

27 dBm

...

Without any restriction to use in all EU Member States

...

MT	B'dan, Mikrotīkls SIA , niddikjara li dan it-tip ta' tagħmir tar-radju RBMetalG-52SHPacn huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ġej:https://mikrotik.com/productsImage Added
NL	Hierbij verklaar ik, Mikrotīkls SIA , dat het type radioapparatuur RBMetalG-52SHPacn conform is met Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres:https://mikrotik.com/productsImage Added
NO	Mikrotīkls SIA erklærer herved at utstyret RBMetalG-52SHPacn er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 2014/53/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse:https://mikrotik.com/productsImage Added
PL	Mikrotīkls SIA niniejszym oświadcza, że typ urządzenia radiowego RBMetalG-52SHPacn jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem internetowym: https://mikrotik.com/productsImage Added
PT	O(a) abaixo assinado(a) Mikrotīkls SIA declara que o presente tipo de equipamento de rádio RBMetalG-52SHPacn está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet:https://mikrotik.com/productsImage Added
RO	Prin prezenta, Mikrotīkls SIA declară că tipul de echipamente radio RBMetalG-52SHPacn este în conformitate cu Directiva 2014/53/UE. Textul integral al declarației UE de conformitate este disponibil la următoarea adresă internet:https://mikrotik.com/productsImage Added
SK	Mikrotīkls SIA týmto vyhlasuje, že rádiové zariadenie typu RBMetalG-52SHPacn je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese:https://mikrotik.com/productsImage Added
SL	Mikrotīkls SIA potrjuje, da je tip radijske opreme RBMetalG-52SHPacn skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu:https://mikrotik.com/productsImage Added
SV	Härmed försäkrar Mikrotīkls SIA att denna typ av radioutrustning RBMetalG-52SHPacn överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress:https://mikrotik.com/productsImage Added

MPE statement

This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body, unless specifically stated otherwise in page 1 of this document. In RouterOS you must specify your country, to make sure local wireless regulations are observed.

Frequency bands terms of use

* It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed!