CAP behavior of AP is configured in /interface wireless cap menu. It contains the following settings:
Property | Description |
---|---|
enabled (yes | no; Default: no) | Disable or enable CAP feature |
interfaces (list of interfaces; Default: empty) | List of wireless interfaces to be controlled by Manager |
certificate (certificate name | none; Default: none) | Certificate to use for authenticating |
discovery-interfaces (list of interfaces; Default: empty) | List of interfaces over which CAP should attempt to discover Manager |
caps-man-addresses (list of IP addresses; Default: empty) | List of Manager IP addresses that CAP will attempt to contact during discovery |
caps-man-names (list of allowed CAPs Manager names; Default: empty) | List of Manager names that CAP will attempt to connect, if empty - CAP does not check Manager name |
caps-man-certificate-common-names (list of allowed CAPs Manager CommonNames; Default: empty) | List of Manager certificate CommonNames that CAP will connect to, if empty - CAP does not check Manager certificate CommonName |
bridge (bridge interface; Default: none) | Bridge to which interfaces should be added when local forwarding mode is used |
static-virtual (Static Virtual Interface; Default: no) | CAP will create Static Virtual Interfaces instead of Dynamic and will try to reuse the same interface on reconnect to CAPsMAN if the MAC address will be the same. Note if two or more interfaces will have the same MAC address the assignment from the CAPsMAN could be random between those interfaces. |