Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

RB5009UG+S+IN


Safety

...

Warnings

Before you work on any

...

equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents

...

.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.

...


This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation for people and damage to the system.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.

...

This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures 

Image Removed Electric shock hazard. This equipment is to be serviced by trained personnel onlyIt is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik devices must be professionally installed.

Setup

  • Make sure your ISP is allowing hardware change and will automatically issue an IP address.
  • Connect your ISP cable to the first Ethernet port.
  • Connect your PC to any of the Ethernet ports.
  • Connect the device to the power source.
  • Use a Web browser or WinBox to connect to the default IP address of 192.168.88.1 from any port, with the username admin and no password.
  • If IP is not available, download WinBox from our webpage and use it to connect through MAC address.
  • Update RouterOS software to the latest version, and make sure that the device has an internet connection.
  • If the device does not have an internet connection update software by downloading the latest version from our webpage https://mikrotik.com/download
  • Find the latest software and choose your packages.
  • To get the architecture type of your device model, open WinBox, WebFig go to (System/Resources).
  • Download packages to the PC and upload them to the WinBox, WebFig, (Files) menu, and reboot the device.
  • Set up your password to secure the device.

...

Once logged in, we recommend clicking the "Check for updates" button in the QuickSet menu, as updating your RouterOS software to the latest version ensures the best performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to conform with to local regulations.
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: https://mt.lv/help. In case an IP connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side (all access is blocked from the Internet port by default).
For recovery purposes, it is possible to boot the device for reinstallation, see section Buttons and jumpers.

...

  1. Find the designed mounting holes on both sides of the device, as shown in the picture;
  2. Use provided screws to secure the device to the wall;
  3. Based on the wall material you can use a drill bit and provided dowels.

...

  • Release the button when the green LED starts flashing, to reset the RouterOS configuration to defaults.
  • Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers (required for reinstalling RouterOS over the network).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.

LED

  • Hidden Green LED behind the Reset button is a USER LED
  • Blue LED 1 is the DC1 Power LED
  • Blue LED 2 is the DC2 Power LED
  • Green SFP+ LED is an SFP+ port link and activity LED
  • Ethernet RJ45 Green LEDs are Ethernet port link and activity LEDs
  • Ethernet RJ45 Port 1 Orange LED is PoE-in status LED
  • Ethernet RJ45 Port 2-8 Orange LEDs are unused on this model

Accessories

The package includes the following accessories that come with the device:

...

Please visit wiki pages for the MikroTik SFP module compatibility table: https://wiki.mikrotik.com/wiki/MikroTik_wired_interface_compatibility

...

The device supports RouterOS software version 7.0.5. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested.


Note

To avoid pollution of the environment, please separate the device from household waste and dispose of it in a safe manner, such as at designated waste disposal sites. Familiarize yourself with the procedures for the proper transportation of the equipment to the designated disposal sites in your area.

Federal Communication Commission Interference Statement

Image RemovedImage Added

This equipment has been tested and found to comply with the limits for a Class A B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

...

instructions, may cause harmful interference to radio communications.

...

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the

...

user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.

Innovation, Science, and Economic Development Canada

This device

...

complies with Industry Canada's license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)

...

this device may not cause interference

...

, and (2)

...

this device must accept any interference, including interference that may cause undesired operation of the device.

...

Le présent appareil est conforme aux CNR

...

d'Industrie Canada applicables aux appareils radio exempts de licence.

...

L'exploitation est autorisée aux deux conditions suivantes: (1)

...

l'appareil ne doit pas produire de brouillage

...

, et (2)

...

l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible

...

d'en compromettre le fonctionnement.

This Class A digital Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [AB] est conforme à la norme NMB-003 du Canada.

CAN ICES-003 (AB) / NMB-003 (AB)

CE Declaration of Conformity

...

BG

...

С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение RB5009UG+S+IN е в съответствие с Директива 2014/30/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: https://mikrotik.com/products

...

CS

...

Tímto Mikrotīkls SIA prohlašuje, že typ rádiového zařízení RB5009UG+S+IN je v souladu se směrnicí 2014/30/EU. Úplné znění EU prohlášení o shodě je k dispozici na této internetové adrese: https://mikrotik.com/products

...

DA

...

Hermed erklærer Mikrotīkls SIA, at radioudstyrstypen RB5009UG+S+IN er i overensstemmelse med direktiv 2014/30/EU. EU-overensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse: https://mikrotik.com/products

...

DE

...

Hiermit erklärt Mikrotīkls SIA, dass der Funkanlagentyp RB5009UG+S+IN der Richtlinie 2014/30/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: https://mikrotik.com/products

...

EL

...

UKCA marking

Image Added

Eurasian Conformity Mark

Информация о дате изготовления устройства указана в конце серийного номера на его наклейке через дробь. Первая цифра означает номер года (последняя цифра года), две последующие означают номер недели.

Изготовитель: Mikrotikls SIA, Aizkraukles iela 23, Riga, LV-1006, Латвия, support@mikrotik.com. Сделано в Китае, Латвии или Литве. Cм. на упаковке.

Для получения подробных сведений о гарантийном обслуживании обратитесь к продавцу. Информация об импортерах продукции MikroTik в Российскую Федерацию: https://mikrotik.com/

...

EN

...

Hereby, Mikrotīkls SIA declares that the radio equipment type RB5009UG+S+IN is in compliance with Directive 2014/30/EU. The full text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products

...

ES

...

Por la presente, Mikrotīkls SIA declara que el tipo de equipo radioeléctrico RB5009UG+S+IN es conforme con la Directiva 2014/30/UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: https://mikrotik.com/products

...

ET

...

Käesolevaga deklareerib Mikrotīkls SIA, et käesolev raadioseadme tüüp RB5009UG+S+IN vastab direktiivi 2014/30/EL nõuetele. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil: https://mikrotik.com/products

...

FI

...

Mikrotīkls SIA vakuuttaa, että radiolaitetyyppi RB5009UG+S+IN on direktiivin 2014/30/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: https://mikrotik.com/products

...

FR

...

Le soussigné, Mikrotīkls SIA, déclare que l'équipement radioélectrique du type RB5009UG+S+IN est conforme à la directive 2014/30/UE. Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante: https://mikrotik.com/products

...

HR

...

Mikrotīkls SIA ovime izjavljuje da je radijska oprema tipa RB5009UG+S+IN u skladu s Direktivom 2014/30/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj internetskoj adresi: https://mikrotik.com/products

...

HU

...

Mikrotīkls SIA igazolja, hogy a RB5009UG+S+IN típusú rádióberendezés megfelel a 2014/30/EU irányelvnek. Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen: https://mikrotik.com/products

...

IT

...

Il fabbricante, Mikrotīkls SIA, dichiara che il tipo di apparecchiatura radio RB5009UG+S+IN è conforme alla direttiva 2014/30/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: https://mikrotik.com/products

...

IS

...

Hér með lýsir Mikrotīkls SIA því yfir að RB5009UG+S+IN er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/30/EU. Fullur texti ESB samræmisyfirlýsingar er að finna á eftirfarandi veffangi: https://mikrotik.com/products

...

LT

...

Aš, Mikrotīkls SIA, patvirtinu, kad radijo įrenginių tipas RB5009UG+S+IN atitinka Direktyvą 2014/30/ES. Visas ES atitikties deklaracijos tekstas prieinamas šiuo interneto adresu: https://mikrotik.com/products

...

LV

...

Ar šo Mikrotīkls SIA deklarē, ka radioiekārta RB5009UG+S+IN atbilst Direktīvai 2014/30/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē: https://mikrotik.com/products

...

MT

...

B'dan, Mikrotīkls SIA, niddikjara li dan it-tip ta' tagħmir tar-radju RB5009UG+S+IN huwa konformi mad-Direttiva 2014/30/UE. It-test kollu tad-dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ġej: https://mikrotik.com/products

...

NL

...

Hierbij verklaar ik, Mikrotīkls SIA, dat het type radioapparatuur RB5009UG+S+IN conform is met Richtlijn 2014/30/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: https://mikrotik.com/products

...

NO

...

Mikrotīkls SIA erklærer herved at utstyret RB5009UG+S+IN er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 2014/30/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse: https://mikrotik.com/products

...

PL

...

Mikrotīkls SIA niniejszym oświadcza, że typ urządzenia radiowego RB5009UG+S+IN jest zgodny z dyrektywą 2014/30/UE. Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem internetowym: https://mikrotik.com/products

...

PT

...

O(a) abaixo assinado(a) Mikrotīkls SIA declara que o presente tipo de equipamento de rádio RB5009UG+S+IN está em conformidade com a Diretiva 2014/30/UE. O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet: https://mikrotik.com/products

...

RO

...

Prin prezenta, Mikrotīkls SIA declară că tipul de echipamente radio RB5009UG+S+IN este în conformitate cu Directiva 2014/30/UE. Textul integral al declarației UE de conformitate este disponibil la următoarea adresă internet: https://mikrotik.com/products

...

SK

...

Mikrotīkls SIA týmto vyhlasuje, že rádiové zariadenie typu RB5009UG+S+IN je v súlade so smernicou 2014/30/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese: https://mikrotik.com/products

...

SL

...

buy/europe/russia

Продукты MikroTik, которые поставляются в Евразийский таможенный союз, оцениваются с учетом соответствующих требований и помечены знаком EAC, как показано ниже:

Image Added


Norma Oficial Mexicana

EFICIENCIA ENERGETICA CUMPLE CON LA NOM-029-ENER-2017.

La operacion de este equipo esta sujeta a las siguientes dos condiciones:

  • Es posible que este equipo o dispositivo no cause interferencia perjudicial y.
  • Este equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacion no deseada.

Fabricante: Mikrotikls SIA, Brivibas gatve 214i, Riga, LV-1039, Latvia.

País De Origen: Letonia; Lituania; China (Republica Popular); Estados Unidos De America; Mexico.

Por favor contacte a su distribuidor local para preguntas regionales específicas. La lista de importadores se puede encontrar en nuestra página de inicio – https://mikrotik.com/buy/latinamerica/mexico.

CE Declaration of Conformity

Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.

The full text of the EU Declaration of Conformity is available at the following internet address: https://mikrotik.com/productsImage Added 

...

SV

...

Härmed försäkrar Mikrotīkls SIA att denna typ av radioutrustning RB5009UG+S+IN överensstämmer med direktiv 2014/30/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress: https://mikrotik.com/products

(EN) Technical Specifications / (DE) Technische Spezifikationen / (FR) Spécifications techniques /

(IT) Specifiche tecniche / (ES) Especificaciones técnicas / (RU) Технические характеристики:

...

Degrees of protection provided by enclosure (IP Code)

...



...

DC Jack = 12-57 V DC

PoE In Ethernet Port = 18-57 V DC

2-pin terminal = 12-57 V DC

24 V

1.5 A

IP20

...

Info
Information contained here is subject to change. Please visit the product page on www.mikrotik.com for the most up-to-date version of this document.