...
Feature | v7.0Beta7 | v7.1Beta1 | |
---|---|---|---|
Convert route rules after upgrade from v6.x | N/A | ||
IPv4 Route Rules | OK | ||
IPv6 Route Rules | NOK | OK | |
ECMP flags | OK | ||
dst@table | OK | ||
gateway@table | OK | ||
gateway%interface | OK | ||
recursive route over ipv6 LL address | OK | ||
3 level recursive gateway with ECMP | OK | ||
IPV6 ECMP | OK | ||
IPv6 connected ECMP | N/A | OK | |
Addresses from same subnet to multiple interfaces | NOK | ||
Show time when route was last updated | N/A | ||
Check Gateway | Ping OK, ARP NOK (works as ping), BFD NOK (not implemented) | ||
Scope and target scope | OK | ||
IPv4 Mangle routing-mark | OK | ||
IPv6 Mangle routing-mark | NOK (Added but does not work at the moment) | OK | |
Packet SRC address | NOK (wrong src is picked for locally originated packets) | ||
Routing-table parameter for ping and telnet | NOK | ||
Show if route is hardware accelerated | N/A | ||
Custom route selection policy | N/A | ||
IPv4 with IPv6 nexthops and RFC5549 | N/A | ||
Routing Instance | OK | ||
VRF | OKNeeds more testing | ||
Some kind of mechanism to import/export routes from one vrf to another within same router | N/A | ||
Convert OSPF config from v6 to v7 after upgrade | N/A | ||
OSPF neighbours in in NSSA Area | Cannot establish adjacency | ||
OSPF in broadcast network | Does not work with more than 2 neighbours | ||
OSPF with routing filters | OK | ||
OSPF Virtual Link | OK | ||
BGP and OSPF SNMP monitoring | N/A | ||
Convert BGP config from v6 to v7 after upgrade | N/A | ||
BGP Templates and dynamic peers | OK | ||
BGP connect listen on network | OK | ||
BGP guess remote.as | OK | ||
Show from which peer route received | OK ( /routing/route/print detail --> belongs-to) | ||
BGP Address Families | Currently only IPv4, IPv6 | ||
BGP input.accept-* | Does not work right after peer established, need to resend routes | ||
eBGP nexthop self | OK | ||
BFD | N/A | ||
Input Filter | OK | ||
Output Filter | OK | ||
BGP Local address auto selection | OK | ||
BGP route reflect | OK | ||
BGP route server | OK | ||
BGP Roles https://datatracker.ietf.org/doc/draft-ietf-idr-bgp-open-policy/?include_text=1 | OK | ||
BGP peer-cache uptime in "established" state | N/A | ||
BGP Flow Spec | Flow spec attributes are forwarded | ||
BGP Selection | OK | ||
BGP Selection (Multipath) | N/A | ||
BGP Confederation | OK | ||
BGP Aggregation | N/A | ||
BGP ORF | N/A | ||
Discard prefix RTBH rfc 6666 | N/A | ||
AS-wide Unique BGP Identifier RFC 6286 | N/A | ||
MPLS | N/A | ||
RPKI session | OK | ||
RPKI possibility to view received info of specific prefix | N/A | OK | |
RPKI show connection status | N/A | ||
Convert routing filters after upgrade from v6.x | N/A | ||
Routing filter chain drop by default without rules | OK | ||
Routing filter prefix match | OK | ||
Routing filter protocol match | Missing other protocols like modem DHCP etc (these routes are not matched by "static") | ||
Routing filter append communities | OK | ||
Routing filter append large community | OK | ||
Routing filter set weight | "sub, add" does not work if attribute has default unset value, if attribute is not set then default value should be assumed. | ||
Routing filter set local pref | "sub, add" does not work if attribute has default unset value, default value should be 100 if not set. | ||
Routing filter set MED | "sub,add" should assume default value. | ||
Routing filter set origin | OK | ||
Routing filter set igp metric from OSPF cost | Can be set with set-num-prop=bgp-igp-metric<add>ospf-ext-metric or ospf-metric, but what to do if it is not possible to guess which metric to use? | ||
Routing filter match prefix with address list | OK | ||
Routing filter match community/large community lists | OK | ||
Routing filter add prefix to address list | N/A | ||
Routing filter validate prefix with RPKI | OK |
...