Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


  1. Plug the Woobm into the USB port of a RouterBOARD device.
  2. Set your computer IP configuration to automatic (DHCP).
  3. From your PC or smartphone, connect to the wireless network name "WoobmAP".
  4. Once connected to the wireless network, open in your web browser, since there is no password by default, you will be logged in automatically.

On the host device, you must set a USB port, for Terminal access through Woobm,

system/console/add port=usb1 disabled=no


The Woobm runs a special operating system where you can configure its basic functionality, the configuration is accessible through a web interface. To connect to the RouterBOARD device, the following methods are available: