Versions Compared

Old Version 9

changes.mady.by.user Certification Department

Saved on

compared with

New Version Current

changes.mady.by.user Serhii T.

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

CCR2004-16G-2S+ 

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity or hot environments.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik devices must be professionally installed.

...

  • Connect with your computer to the device;
  • Download the configuration tool https://mt.lv/winbox;
  • Open the Neighbors tab and connect to the device using MAC address, 192.168.88.1 is available on ether15 ether1 using a web browser;
  • The user name: admin, by default there is no passwordpassword (or, for some models, check user and wireless passwords on the sticker).;
  • To update the device to the latest software version download the latest RouterOS software from https://mikrotik.com/download;
  • Choose ARM64 packages, and save them to your computer;
  • Return to the WinBox and upload downloaded packages;
  • Restart the device.

...

Configuration

The Ethernet port 15 1 has a default IP address for connecting: 192.168.88.1. The username is admin and there is no password. The device doesn't have any other configuration applied by default, please set up WAN IP addresses, user passwords, and update the device. RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: https://mt.lv/help. In case the IP connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side
For recovery purposes, it is possible to boot the device for reinstallation, see a section Reset button.

...