...
width | 50% |
---|
...
width | 880px |
---|
Panel | ||||||
---|---|---|---|---|---|---|
| ||||||
|
...
fter successful RouterOS software instalation (if it was needed) it is time to access the router for the first time. There are various ways how to connect to it:
- Command Line Interface (CLI) via Telnet, ssh, serial cable or even keyboard and monitor if router has VGA card.
- Web interface (WebFig)
- WinBox configuration utility
- Using mobile utility (TikApp)
Normally you connect to the router by IP addresses with any telnet or SSH client software (a simple text-mode telnet client is usually called telnet and is distributed together with almost any OS).
If no IP or MAC connectivity is available, some devices allow connection through a serial port (DB9 or RJ45, depending on the model);
...