...

Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general public.

First use

1. Open cover (see Opening cover).

2. Connect the Ethernet cable from your PC to the Ethernet port.

3. Plug the device into the power source (see Powering).

4. Download the Winbox (see Configuration).

5. Open and search the MAC address in the Neighbors tab.

6. Click on the MAC address and connect.

7. The

   username

   default IP is not set, the user name: is admin

   and

    and there is no password

   . The default IP address from the Ethernet port is 192.168.88.1 for configuration if connecting without WinBox, then set the IP address of your computer to 19.168.88.2.

    (or, for some models, check user and wireless passwords on the sticker).

8. Update the device to the latest RouterOS version,

   make

   and make sure that the device has an internet

   connection 

   connection https://mt.lv/configuration.

9. Set a Country, to make sure local regulations are observed.

10. Set the antenna gain, depending on the antenna used.

11. Set up your password.

12. To manually update the device, please go to https://mikrotik.com/download.

13. Choose (ARM) packages for this device and download them to your PC.

14. Upload downloaded packages to the (Winbox) (Files) menu and reboot the device.

15. Updating your RouterOS software to the latest version will ensure the best performance, stability, and security updates, https://mt.lv/upgrade.

Powering

The device accepts power in the following ways:

...

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.Image Added

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

...

instruction manual, may cause harmful

...

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

...

IMPORTANT: Exposure to Radio Frequency Radiation.
This equipment complies with the IC FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of your body.

...

Frequency bands terms of use

* It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed!

...