Versions Compared

Old Version 57

changes.mady.by.user Guntis G.

Saved on

compared with

New Version 58

changes.mady.by.user Toms Filatovs

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Added description for configuration.client-isolation

...

PropertyDescription

chains (list of integer 0..7 )

Radio chains to use for receiving signals. Defaults to all chains available to the corresponding radio hardware.

client-isolation (no | yes)

  • yes - AP will not forward traffic between client devices connected to it
  • no -  AP will forward traffic between client devices connected to it

Default: no

country (name of a country)

Determines, which regulatory domain restrictions are applied to an interface. Defaults to "United States".

Note: It is important to set this value correctly to comply with local regulations and ensure interoperability with other devices.

hide-ssid (no | yes)

  • yes - AP does not include its SSID in beacon frames, and does not reply to probe requests that have broadcast SSID.

  • no - AP includes its SSID in the beacon frames, and replies to probe requests that have broadcast SSID.

Default: no

mode (ap | station)

Interface operation mode

  • ap (default) - interface operates as an access point
  • station - interface acts as a client device, scanning for access points advertising the configured SSID
ssid (string)The name of the wireless network, aka the (E)SSID. No default value.
tx-chains (list of integer 0..7)Radio chains to use for transmitting signals. Defaults to all chains available to the corresponding radio hardware.
tx-power (integer 0..40)A limit on the transmit power (in dBm) of the interface. Can not be used to set power above limits imposed by the regulatory profile. Unset by default.

...