...
- Open the bottom lid (see "Bottom Lid17498204").
- Connect all served devices to Ethernet ports.
- Connect the device to the power source (see "Powering17498204").
- Open network connections on your PC.
- Set the IP address of your computer to 192.168.88.4/24.
- The Configuration has to be done through the web browser or WinBox configuration tool https://mt.lv/winbox.
- Once connected to the network, open https://192.168.88.1
in your web browser to start configuration, user name: admin and there is no password by default. - We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best performance and stability. Must have an active Internet connection configured.
- Set a secure passwordChoose your country, to apply country regulation settings and set up your password on the screen that loads.
Expansion slots and ports
...
We recommend clicking the "Check for updates" button in the QuickSet menu, as updating your RouterOS software to the latest version ensures the best performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to conform with local regulations.
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: https://mt.lv/help. In case the IP connection is not available, the Winbox tool (https://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side (all access is blocked from the Internet port by default).
For recovery .
For recovery purposes, it is possible to boot the device for reinstallation, see section Buttons and Jumpers 17498204.
Powering
The device accepts power in the following ways:
...
Use included DC plug to connect with your power source:
- DC plug 2.1x5.5x12 mm to Screw Terminal 2pin.
- Connect your power source cables to the two pins and secure them in place by tightening screws.
- Connect the DC plug to the device.
The power consumption under maximum load can reach 10 W, with attachments 28 W.
Connecting to a PoE Adapter:
...
The device supports passive PoE from one Ethernet marked in amber color. You can power Mikrotik devices which supports powering through Ethernet. The power delivered through the PoE port will depend on the incoming to the device.
Bottom Lid
- Bottom The bottom lid is secured in place with the captive screw, it can be unscrewed by hand, but do not remove the screw completely.
- Pull the cover towards.
- Lift to access Ethernet ports.
...
The device can be mounted in several ways: pole, wall, or ceiling. The package also includes a drill hole template with detailed mounting instructions, to help you with the drill hole marking. The device has eight mounting points for versatility use zip ties or steel clamps for mounting on the pole.
The IP rating scale for this device is IP54. When mounting outdoors, please ensure that any cable openings are directed downwards. We recommend using the POE injector and proper grounding with Cat6 shielded cable.
Mounting points:
- There are eight mounting points on the back of this device. Choose the most relevant ones.
- Middle points are designed for mounting on the mast, there is are curves on the case for slim fitment.
It It's recommended to secure Ethernet cable to the pole using zip ties. With the distance from the device approximately 30 cm.
The device must be mounted by UP arrow facing upwards. The
The installation infrastructure (towers and masts), as well as the router itself, must be properly grounded. The device includes a grounding wire attachment screw on the backside.
...
- Use included a template to mark spots for drilling holes. Align accordingly, it will depend on how the device will be mounted finally.
- Insert dowels if needed, depends on wall structure and material.
- Insert screws and screw them by leaving approximately 1 cm out.
- Attach the unit to the position.
- Use screw holes under the bottom cover and tighten to secure in place. Extend your Ethernet cables through the openings and connect to Ethernet ports.
- Close bottom latch.
...
Carefully check the wall for electric cables before drilling mounting holes.
...
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Accessories
Package The package includes the following accessories that come with the device:
...
Operating system support
The device supports RouterOS software supports SwOS / RouterOS (Dual boot) software version 6.44.546. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential commercial installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructionsinstruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
...
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.
...
Innovation, Science and Economic Development Canada
This device
...
contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS
...
(s). Operation is subject to the following two conditions: (1)
...
This device may not cause interference
...
. (2)
...
This device must accept any interference, including interference that may cause undesired operation of the device.
...
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
...
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
...
L’exploitation est autorisée aux deux conditions suivantes :
...
1)
...
L’appareil ne doit pas produire de brouillage
...
; 2)
...
L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
...
d’en compromettre le fonctionnement.
CE Declaration of Conformity
Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.
CAN ICES-003 (A) / NMB-003 (A)
CE Declaration of Conformity
BG | С настоящото Mikrotīkls SIA декларира |
BG
, че този тип радиосъоръжение RouterBOARD е в съответствие с Директива 2014/ |
30/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: |
CS | Tímto Mikrotīkls SIA prohlašuje, že typ rádiového zařízení RouterBOARD je v souladu se směrnicí 2014/ |
30/EU. Úplné znění EU prohlášení o shodě je k dispozici na této internetové adrese: |
DA | Hermed erklærer Mikrotīkls SIA , at radioudstyrstypen RouterBOARD er i overensstemmelse med direktiv 2014/ |
30/EU. EU-overensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse: |
DE | Hiermit erklärt Mikrotīkls SIA , dass der Funkanlagentyp RouterBOARD der Richtlinie 2014/ |
30/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: |
EL | Με την παρούσα ο/η Mikrotīkls SIA , δηλώνει ότι ο ραδιοεξοπλισμός RouterBOARD πληροί την οδηγία 2014/ |
30/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο: |
EN | Hereby, Mikrotīkls SIA declares that the radio equipment type RouterBOARD is in compliance with Directive 2014/ |
30/EU. The full text of the EU declaration of conformity is available at the following internet address: |
ES | Por la presente, Mikrotīkls SIA declara que el tipo de equipo radioeléctrico RouterBOARD es conforme con la Directiva 2014/ |
30/UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: |
ET | Käesolevaga deklareerib Mikrotīkls SIA , et käesolev raadioseadme tüüp RouterBOARD vastab direktiivi 2014/ |
30/EL nõuetele. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil: |
FI | Mikrotīkls SIA vakuuttaa, että radiolaitetyyppi RouterBOARD on direktiivin 2014/ |
30/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: |
FR | Le soussigné, Mikrotīkls SIA , déclare que l'équipement radioélectrique du type RouterBOARD est conforme à la directive 2014/ |
30/UE. Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante: |
HR | Mikrotīkls SIA ovime izjavljuje da je radijska oprema tipa RouterBOARD u skladu s Direktivom 2014/ |
30/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj internetskoj adresi: |
HU | Mikrotīkls SIA igazolja, hogy a RouterBOARD típusú rádióberendezés megfelel a 2014/ |
30/EU irányelvnek. Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen: |
IT | Il fabbricante, Mikrotīkls SIA , dichiara che il tipo di apparecchiatura radio RouterBOARD è conforme alla direttiva 2014/ |
30/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: |
IS | Hér með lýsir Mikrotīkls SIA því yfir að RouterBOARD er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/ |
30/EU. |
Fullur texti ESB samræmisyfirlýsingar er að finna á eftirfarandi veffangi: |
LT | Aš, Mikrotīkls SIA , patvirtinu, kad radijo įrenginių tipas RouterBOARD atitinka Direktyvą 2014/ |
30/ES. Visas ES atitikties deklaracijos tekstas prieinamas šiuo interneto adresu: |
LV | Ar šo Mikrotīkls SIA deklarē, ka radioiekārta RouterBOARD atbilst Direktīvai 2014/ |
30/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē: |
MT | B'dan, Mikrotīkls SIA , niddikjara li dan it-tip ta' tagħmir tar-radju RouterBOARD huwa konformi mad-Direttiva 2014/ |
30/UE. It-test kollu tad-dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ġej: |
NL | Hierbij verklaar ik, Mikrotīkls SIA , dat het type radioapparatuur RouterBOARD conform is met Richtlijn 2014/ |
30/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: |
NO | Mikrotīkls SIA erklærer herved at utstyret RouterBOARD er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 2014/ |
30/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse: |
PL | Mikrotīkls SIA niniejszym oświadcza, że typ urządzenia radiowego RouterBOARD jest zgodny z dyrektywą 2014/ |
30/UE. Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem internetowym: |
PT | O(a) abaixo assinado(a) Mikrotīkls SIA declara que o presente tipo de equipamento de rádio RouterBOARD está em conformidade com a Diretiva 2014/ |
30/UE. O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet: |
RO | Prin prezenta, Mikrotīkls SIA declară că tipul de echipamente radio RouterBOARD este în conformitate cu Directiva 2014/ |
30/UE. Textul integral al declarației UE de conformitate este disponibil la următoarea adresă internet: |
SK | Mikrotīkls SIA týmto vyhlasuje, že rádiové zariadenie typu RouterBOARD je v súlade so smernicou 2014/ |
30/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese: |
SL | Mikrotīkls SIA potrjuje, da je tip radijske opreme RouterBOARD skladen z Direktivo 2014/ |
30/EU. Celotno besedilo izjave EU o skladnosti je na |
SV
Härmed försäkrar Mikrotīkls SIA att denna typ av radioutrustning RouterBOARD överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress:
https://mikrotik.com/products...
voljo na naslednjem spletnem naslovu: https://mikrotik.com/products | |
SV | Härmed försäkrar Mikrotīkls SIA att denna typ av radioutrustning RouterBOARD överensstämmer med direktiv 2014/30/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress: https://mikrotik.com/products |