Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migration of unmigrated content due to installation of a new plugin

...

  • (Optional) Install the device in a case.
  • Connect cables to wireless cards and Ethernet ports.
  • Plug-in power cable (directly or through the PoE injector) to turn on the device, please see powering paragraph.
  • The Initial connection has to be done via the Ethernet cable, using the MikroTik Winbox utility. Winbox should be used to connect to the default IP address of 192.168.88.1 with the username admin and no password (or, for some models, check user and wireless passwords on the sticker).
  • We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best performance and stability,
  • Choose your country, to apply country regulation settings (if applicable), and set up your password on the screen that loads.







Wiki Markup
* Insert the miniPCIe and M.2 cards (not included) and secure them with the included screws. 
\[Only one 802.11 wireless card can be used at once\]. It is suggested to use the other slot for LTE modems. Please see [MiniPCIe slot usage|#MiniPCIe slot usage|outline] paragraph.







Assembly

M33G for professional use. Each of the devices comes in ESD protective packaging. When handling electrical equipment please observe the following safety precautions:

...

To receive a logical "1" on the pin, the voltage should be between 1.41 to 3.63 V.


By default pins 12,13,15,16 are configured for the second "serial1" port usage:

Code Block
languageros
/system/routerboard/settings/set gpio-function=serial1

They can be resigned for GPIO usage in /iot/gpio/digital menu with following commands:

Code Block
languageros
/system/routerboard/settings/set gpio-function=""
/system/reboot

Buttons and jumpers

RouterBOOT reset button. This button has the following functions:

...