Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Yellow - partially working
  • Green - Working
  • Red - Not working at the moment

Feature

v7.1v7.2v7.3v7.6v7.
7v7.
10v7.12v7.14

v7.15

Winbox        
 
BGP support







OSPF support







RIP support







Router ID support







Routing filter support
















Generic
 
        
/31 address supportN/A
Routed traffic does not work to odd address.




Convert route rules after upgrade from v6.x







Static IPv6 upgrade from ROS v6







IPv4 Route Rules







IPv6 Route Rules







ECMP flags







dst@table







gateway@table







gateway%interface







recursive route over ipv6 LL address







3 level recursive gateway with ECMP 







IPV6 ECMP







IPv6 connected ECMP







Addresses from same subnet to multiple interfacesN/A






Show time when route was last updatedN/A






Check GatewayBFD not ready






Scope and target scope







IPv4 Mangle routing-mark







IPv6 Mangle routing-mark







Packet SRC addressDoes not work correctly with /32 addresses






Routing-table parameter for ping and telnet







Show if route is hardware acceleratedShows if route is candidate for HW acceleration






Custom route selection policy 







IPv4 with IPv6 nexthops for RFC5549
















Routing id







VRF







Management services support for VRFs telnet, ssh, api, www services can be set to listen on specific VRF






Some kind of mechanism to import/export routes from one vrf to another within same routerN/A






BFDN/A


Initial support











OSPF
 
        
Convert OSPF config from v6 to v7 after upgrade

Known conversion problems:

  • NBMA neighbors place in backbone
  • ospf-v2 networks + interface may have issues

  • dynamic interfaces may have issues

  • MPLS PE CE features are not converted








OSPF neighbors in NSSA Area







OSPF in broadcast network







OSPF with routing filters







OSPF Virtual Link







OPSF input filtering







HMAC-SHA auth RFC5709N/A

Initial support



OSPF SNMP monitoringN/A






BGP SNMP monitoring



For ipv4 sessions











IS-IS







IPv4




Initial support

IPv6







Traffic Engineering
















BGP        
 
Convert BGP config from v6 to v7 after upgrade







BGP Templates and dynamic peers







BGP connect listen on a network







BGP guess remote.as







Show from which peer route receivedOK ( /routing/route/print detail --> belongs-to)






BGP Address Families







BGP input.accept-*







eBGP nexthop self







Input Filter







Output Filter







BGP Local address auto selection







BGP route reflect







BGP route server







BGP Roles
https://datatracker.ietf.org/doc/draft-ietf-idr-bgp-open-policy/?include_text=1
rfc roles not fully implemented






BGP session uptime in "established" state







BGP session last established time
















BGP Flow SpecFlow spec attributes are forwarded






BGP Selection
















BGP Selection (Multipath)N/A






BGP Confederation







BGP AggregationN/A






BGP ORFN/A






Discard prefix RTBH  RFC 6666N/A






AS-wide Unique BGP Identifier RFC 6286N/A






Exported PDU PCAP saver







Exported PDU PCAP loader







BGP Advertisement monitoring
Initial implementation by dumping to pcap
Advertisements rework



BGP Prefix limit

Initial support




BGP advertise IPv4 prefix with IPv6 nexthop (RFC5549)







BGP VPNv6 support



Prerequisites are made, need to add actual BGP Afi











MPLS        
 
Static label mapping







Static mapping upgrade from v6







LDP IPv4 mapping







LDP IPv6 mapping







LDP signaled VPLS







LDP config upgrade from v6







LDP Dual Stack







TE







TE Config upgrade from v6







VPLS Encap to TE







BGP signaled VPLS







VPLS config upgrade from v6







Fast reroute







MPLS ECMP







One label per VRF







Ability to use MPLS EXP-bit in QueuesN/A






MPLS Fast-PathN/A















RPKI session







RPKI possibility to view received info of specific prefix







RPKI show connection status
















Filters        
 
Convert routing filters after upgrade from v6.x







Syntax completion







Routing filter chain drop by default without rules







Routing filter prefix match







Routing filter protocol match







Routing filter append communities







Routing filter append large community







Routing filter set weight







Routing filter set local pref







Routing filter set MED







Routing filter set origin







Routing filter set igp metric from OSPF cost







Routing filter match prefix with address list







Routing filter match community/large community lists







Routing filter add a prefix to address listN/A






Routing filter validate prefix with RPKI
















Multicast
 
        
IGMP-Proxy







PIM-SMInitial support








Performance Status


Used hardware:

...